Testomat 2000® Polymer
Artikelnummer: 100470
* Preise exkl. MwSt. zzgl. Versandkosten.

Produktinformationen
Maße: 380 x 280 x 480 mm
Gewicht: 10,600 kg
Messparameter: Polymers | Polyacrylates
Messbereich: By means of the adjustable factor ranging from 0.01 to 99.99, a measuring range from 0.5 to 4,999.5 mg/l (ppm) is achieved
Einsatzbereich: Monitoring of conditioning agents in cooling and heating circuits, Boiler water supply
Menüführung: German, English, French
Unser
Kommentar: Reagent type:
It is neccessary to customize the Testomat 2000® Polymer because of the
large amount of polyacrylats, which can be measured with this unit.
Either use your existing reagents or use our new polymer reagents.
Beschreibung
Beschreibung "Testomat 2000® Polymer"
The Testomat 2000® Polymer process photometer is an online analyzer for monitoring the content of polyacrylate in the range fo 0 to 50 mg/l (ppm) (with a set product specific factor of 1.00) using the photometric analysis principle.Performance profile:
- Analysis via automatic dosing of two reagents
- The analysis result is displayed after a reaction time of approx. 7 min. (Measuring time without rinsing time)
- Menu-driven operation and programming via plain text display
- Selection of unit in ppm or mg/l
- High-precision titration using a piston dosing pump
- Analysis initiation:
- Automatic interval operation (Interval pause adjustable from 0–255 min)
- External control
- Dynamic (fatigue-dependent interval operation)
- Quantity dependent via contact water meter
- Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functions
- Monitoring of two measuring points (Switching by external solenoid valves)
- Programmable service address
- Internal error documentation
- Programmable maintenance interval for maintenance request