N-FLASH10 Conductivity meter in T-piece, 0-10 μS/cm with 2 LEDs, battery-operated, max. 60°C

Our Neomeris N-FLASH10 conductivity meter in a T-piece with 3/8 inch connection is a conductivity measuring instrument that is used to monitor the electrical conductivity of water after flowing through the ion exchanger cartridge. 

The measuring instrument including the integrated measuring cell is battery operated and permanently installed in the T-piece. If the measured electrical conductivity is below the limit value of 10µS/cm, the green LED flashes; if it is above, the red LED flashes, indicating that a cartridge or resin change is required. Due to the T-piece used, the measuring device can also be integrated very easily and is optimally installed in the liquid flow for a stable measurement. 

Measuring principle: 

The measuring cell generates an electrical signal that is proportional to the conductivity of the liquid. This signal is processed in the device and the LED is controlled via the programming stored in the device. 

Application: 

Conductivity meters are often used in water treatment plants in the process industry.

Screw-in thread: 3/8"; others available upon request

Material housing: POM black

Material lid: Plexiglas

Material electrodes: V4A 4571

Material O-ring: EPDM

Cell constant: C= 0.6 +/- 10%

Max. Operating pressure: 6 bar

Max. Operating temperature: 60°C

Temperature sensor: without

Display: 

LED green <10μS/cm