JUMO tecLine CL2 sensor for free chlorine
.jpg?ts=1764926717)
Product information
Description
Description "JUMO tecLine CL2 sensor for free chlorine"
These amperometric sensors with membrane are used to determine the concentration of free chlorine. They are able to measure various inorganic chlorine compounds, including chlorine gas (Cl₂), electrolytically generated chlorine, sodium hypochlorite (NaOCl), calcium hypochlorite (Ca(OCl)₂) and chlorinated lime (Ca(OCl)Cl).
Testing for the complete absence of free chlorine is not possible with these sensors.
Depending on the version, the sensors either supply a temperature-compensated current signal (4-20 mA) in an analogue version or a Modbus RTU signal via a digital interface. Calibration takes place in a downstream device such as an indicator, controller, recorder or programmable logic controller (PLC).
The sensors can be connected directly to various transmitters or controllers. These supply the system with the required voltage and enable uncomplicated calibration.
Areas of application:
The sensors are used to measure free chlorine in drinking water, bathing water, industrial water, process water and cooling water.
Frequently Asked Questions
It measures the chlorine level in the water to monitor water quality.
It is suitable for monitoring free chlorine in water, for example in swimming pools or drinking water systems.
Yes. The sensor takes continuous measurements and is suitable for continuous operation.
Yes. It is specifically designed for monitoring chlorine in swimming pool water.
Depending on the version, as a 4–20 mA signal or digitally via Modbus RTU.
No. Calibration is performed via external devices such as controllers or control systems.
It can be easily integrated into existing measurement and control systems.
For drinking water, process water, cooling water, and other applications involving chlorinated water.